POP Server

Monitor the availability of your POP3 Mail Server and receive instant alerts when the response time crosses the configured threshold. Now you can also monitor your dual stack infrastructure with Site24x7. This Basic Monitor is available from Standard Pack.

Add a POP Server

1. Login to Site24x7.
2. Click Admin > Inventory > Monitors > Add Monitor.
3. Select POP Server in Add Monitor page.
4. Specify the following details to add the POP Server:
   • Display name: Provide a name for the POP Server you want to monitor.
   • POP server: Specify the POP Host.
   • Port: Enter the POP Port number. The POP Port will be available by default.
   • Check frequency: Choose the required poll frequency. The frequency can be set from 10 seconds to 1 day. 10, 15, and 30 seconds can be configured if you're using Enterprise, Enterprise Web, Enterprise Plus Web, Elite, Elite Web Packs, Team 2024, Team, and Team Web. For all other users, 1 minute will be the minimum supported check frequency.
     Note

     • Configuring a 30-second check frequency will consume the license of two basic monitors.
     • Configuring a 15-second poll frequency will consume the license of four basic monitors and can be configured only with the On-Premise Poller locations.
     • Configuring a 10-second poll frequency will consume the license of six basic monitors and can be configured only with the On-Premise Poller locations.
   • Connection timeout: Specify the time in seconds for which the connection needs to be established with the target server.
   • Prefer IPv6: If you want to monitor your POP Server over IPv6 enabled locations, simply move the rocker button to "YES" when creating or editing a monitor form.
     

     Note

     • Site24x7 lets you monitor your dual-stacked IPv4/IPv6 based infrastructure as per you need. IPv4 will be enabled as the default protocol. You'll be able to monitor your IPv6 infrastructure, once you enable the rocker button to IPv6. If the connectivity over IPv6 fails, it will not fall back to IPv4 automatically. Read more.
     • Enabling IPv6 in the monitoring form doesn't make it compatible to monitor IPv4, by default. If you want to monitor a resource, which is compatible with both IPv4 and IPv6–you'll have to set up two separate monitor checks for this.
   • Monitoring locations: Select a location profile from the drop down list from where the POP3 Server can be polled from the selected location. You can monitor from IPv4/IPv6 enabled monitoring location. The monitors with 10-second and 15-second poll frequencies will be supported only with On-Premise Poller locations.  
     To know more, refer Location Profile.
     
     
   • Monitor Groups: You can associate your monitor with multiple monitor groups by selecting the relevant monitor groups from the drop down list. This allows in logical grouping of your monitors. 
     To learn how to create a monitor group for your monitors, refer Monitor Groups.
   • Dependent on monitor: Select a monitor from the drop-down list to choose it as your dependent resource. Alerts to your monitor will be suppressed based on the DOWN status of your dependent resource.
     
     Note

     Configuring a dependent resource and suppressing alerts based on the dependent resource's status is part of providing you with better false alerts protection. Learn more about alert suppression at monitor level.

     Note

     If you select "None" in the dependent resource field, alerting will progress as per your normal configuration settings. No alerts will be suppressed in this case as the monitor doesn't have any dependent resource.

     Note

     Multiple monitor group support for monitors allow a monitor to be associated with multiple dependent resources in different monitor groups. If during a normal monitor status check, any one of these dependent resources' status is identified as DOWN, the alert for the monitor will be automatically suppressed. However, the dependency configuration at monitor level is always given the higher priority over any other monitor group level dependency configuration for suppressing alerts.

5. Specify the following details for Configuration Profiles:
   • Threshold and Availability: Select a threshold profile from the drop down list or choose the default threshold set available and get notified when the resources cross the configured threshold and availability.
     To create customized threshold and availability profile for threshold, refer Threshold and Availability.
   • Tags: Associate your monitor with predefined Tag(s) to help organize and manage your monitors creatively. Learn how to add Tags.
   • IT Automation: Select an automation to be executed when the website is down/trouble/up/any status change/any attribute change. The defined action gets executed when there is a state change and selected user groups are alerted.
     To automate corrective actions on failure, refer IT Automation.
     
     
6. Alert Settings:
   • User Alert Group: Select the user group that need to be alerted during a outage. To add multiple users in a group, see User Alert Group. 
   • Notification Profile: Choose a notification profile from the drop down or select the default profile available. Notification profile helps to configure when and who needs to be notified in case of downtime. Refer Notification Profile to create a customized notification profile.
7. Third-Party Integrations: Associate your monitor with a pre-configured third-party service. It lets you push your monitor alarms to selected services and facilitate improved incident management.
   
   Note

   If you haven't setup any integrations yet, navigate across to ”Admin > Third Party Integration” to create one. Tell me more.

8. Click Save.